A fence inspection you can actually use: record, prioritise, repair
Do not just walk the fence looking for something broken. Record what changed, what could let stock through and what needs attention before it becomes a bigger repair.
The short answer
Inspect by run, photograph defects and prioritise by consequence. Deal first with immediate containment or safety risks; then unstable assemblies and structural defects; then planned maintenance. Keep a dated record so “getting worse” means something measurable.
Walk the fence in a repeatable order
- Ground lineGaps, digging, erosion and vegetation
- Mesh and wiresBreaks, loose joins, distortion and corrosion
- Posts and endsMovement, damage, bracing and connections
- Gates and tie-insLatches, hinges, clearance and transitions
Use the same run names as the property plan. If you find a problem, give the photo a location: “Run C, second gate” is much more useful than “bad fence”. Take a wide shot to show the cause and a close shot to show the damage.
Sort the work by consequence
| Priority | Typical observation | Next step |
|---|---|---|
| Act now | Open escape route, unstable tensioned component or dangerous broken wire | Keep people and stock clear; arrange safe containment and repair |
| Plan promptly | An assembly moving, repeated join failures or a widening ground gap | Find the cause and scope the repair before simply adding tension |
| Schedule | Vegetation access problem, deteriorating fittings or a small defect with no immediate opening | Record, monitor and include in planned maintenance |
A defect next to a public road can have a very different consequence from a similar defect inside a secure holding area. Do not assign priority by how dramatic the photo looks alone.
Inspect after events, not only by the calendar
An annual walk gives you a baseline, but floods, fire, storms, fallen trees, earthworks and stock pressure can change a fence between those visits. Recheck the affected sections before relying on them again. Gates and high-use areas may need attention more often than a quiet boundary.
Repeated damage at one place is a clue. Look at stock movement, water flow, ground levels and the load on the fence. Repairing the symptom with the same detail each time may be more expensive than changing the underlying arrangement.
Keep a repair record
Fence inspection record
Print this page and fill in the blanks. Keep it with your photos and quote.
- Date / inspector / run location
- ________________________________
- Photo references and observed defect
- ________________________________
- Immediate risk and temporary action
- ________________________________
- Likely cause—not yet confirmed if uncertain
- ________________________________
- Repair materials and installer required
- ________________________________
- Target date / completed date
- ________________________________
- Recheck result after repair
- ________________________________
Record the exact mesh code, post section and fittings used in a repair. That makes the next order easier and helps distinguish a recurring failure from a different problem nearby. Follow the equipment and wire manufacturer’s safe method whenever tensioned components are involved.
Before you leave this guide
A good inspection ends with a prioritised job list, not just a photo folder. Keep the cause, repair and recheck connected.
Order for the actual repair
Send the damaged section’s location photos and the existing mesh specification. A matching repair starts with identifying what is already there.
Ask about repair materialsSources & scope
This is an Outback planning guide, not a site-specific installation specification. Manufacturer references explain the subject; their branded product dimensions and methods are not automatically specifications for Outback products.
Editorial review: September 2026. Outback links identify our own product information. External sources are independent references, not endorsements. Product prices, availability and order quantities are shown on the current listings or your written quote.Enquire from Canada
Outside Australia, only the Outback Clipgun range can be bought online today. For fencing mesh, pickets, gates and yards, tell us what you need and where you are. We count every enquiry by region to decide where to set up first.
The USA is likely next, and we haven't picked the state yet. If you're in the USA, tell us which state you're in.
MESH MADE IN ORANGE NSW