Outback 7-Rail Combo Panel — 2mm Heavy Duty - with pins
Not sure how much you need? Run your fence through the calculator →
OUTBACK 7-Rail Combo Panel
2mm Heavy Duty
1.8m × 2.1m. Mixed oval rails. 2mm steel throughout. Built heavy on purpose.
The Outback 7-Rail Combo Panel is built for serious cattle work. Now upgraded to 2mm steel throughout — frames and rails — for extra strength, less flex, and a longer working life in the toughest Australian yards.
The 7-rail mixed oval design combines large 115 × 42mm ovals with smaller 70 × 45mm ovals for maximum strength where cattle push hardest, and better visibility and flow where they don't. Includes ground pins.
Ideal for permanent and semi-permanent yards, forcing pens, races, and high-traffic holding areas.
🔩 2mm Upgrade — Why It Matters
Standard combo panels on the market run 1.6mm steel. Under load from heavy cattle, they flex, bend, and eventually need replacing. Weak panels cost you money — in repairs, stock injuries, and time.
The upgraded Outback Panel runs 2mm steel on every frame and every rail. That's a 25% wall thickness increase where it counts. Less flex under crush loads. Longer service life. Built to outlast the yard it sits in.
Why upgrade from 1.6mm panels? Heavy cattle, forcing yards, and bulls don't care how pretty your panels look — they care whether they'll bend. At 2mm with mixed oval rails, this panel handles pressure competitors' panels can't. Stronger steel, smarter rail layout, better price.
2mm Steel Throughout
Frames and rails — 2mm wall thickness. 25% heavier than standard 1.6mm panels on the market.
7 Mixed Oval Rails
Large 115 × 42mm ovals where cattle push. Small 70 × 45mm ovals for visibility and flow.
50×50 SHS Side Frames
Heavy 50 × 50mm square hollow section posts. Built for high-impact zones and race panels.
Pins Included
Ground pins included — 2 pre-drilled anchor holes per panel for secure installation.
Welded Lugs
2 welded lugs on each side for strong, fast panel-to-panel connections. No fiddly hardware.
Animal Safe Design
Mixed oval rails improve visibility, reduce stress, and minimise bruising during stock work.
Modular & Flexible
Works for permanent, semi-permanent, and curved yard layouts. Compatible with standard yard systems.
Galvanised Finish
Full galvanised coating for rust protection and long life in Australian weather.
| Model | Outback Premium 7-Rail Combo Panel — 2mm |
| Height | 1.8 metres |
| Width | 2.1 metres |
| Side Frames | 50 × 50mm SHS, 2.0mm wall thickness |
| Large Rails | Oval 115 × 42mm, 2.0mm thick (×4) |
| Small Rails | Oval 70 × 45mm, 2.0mm thick (×3) |
| Rail Configuration | 7 rails — mixed oval (alternating layout) |
| Finish | Galvanised |
| Connection | 2 welded lugs each side |
| Anchoring | 2 pre-drilled ground pin holes |
| Ground Pins | Included |
| Application | Heavy-duty cattle work — permanent & semi-permanent |
| Made For | Australian conditions & heavy cattle |
🇦🇺 Ships from Orange, NSW · Australian owned & operated · 📞 0434 093 077